Sanded finishes are for interiors only and can only be done when the material is thick enough to accommodate having some of the cork removed to maintain variation between the valleys and ridges. Only the Standard and Premium Grade material is thick enough for this purpose as it removes up to 1/4” of the cork material.
*all panels can have the 2K Poly or FlameStopII applied, but other finishes can only be applied to panels that have been sanded first.
A clear 10-sheen lacquer for a soft glow is applied.
This begins with a base coat of white that is sanded and wiped with a walnut stain and then finished with a clear 10-sheen lacquer topcoat.
We begin with a base coat of silver before re-sanding and applying a top coat of black lacquer only on the ridges of the bark.
A walnut stain is applied to the sanded face and then clear coated with 10-sheen lacquer.
A base coat of gold finish is applied followed by a white coat on the ridges. The white is then sanded and wiped with a walnut stain.
Black lacquer is applied to the ridges and then sanded and top-coated with a 10-sheen lacquer.
A representative will contact you.
Bark House® Poplar Panel Wall Coverings can be laminated to any substrate of your preference that is 1/2″ thick or greater.
The natural grain of the bark will be oriented to the measurement that you give us for the height.
Flat 2K Poly
1/2″ MDF in sizes up to 5’x12′
Extira exterior-grade substrate in sizes up to 5’x12′ (required for exterior installations)